Manual, Semi-Auto or Fully Automatic: Costing the Automation Level
1. What Automation Really Buys
Owners cost automation by the operators it removes. Cutting eight people per shift saves roughly RMB 400,000 a year; against a multi-million investment, it never pays back in a decade. What you buy is batch consistency.
Buyers judge against a spec sheet — iodine number, methylene blue value, hardness, moisture, ash — and one miss rejects the lot. A manual line's weakness is variation: feed rate, discharge temperature, how long the door stays open, the temperature of carbon entering the bag. From one feedstock, one shift makes 1020 mg/g and the next 960 mg/g — two grades at two prices.
Three questions decide it: does the customer buy a fixed grade on contract; is your scatter beyond ±50 mg/g within a batch; can you still hire three-shift furnace operators?
2. Three Levels, Side by Side
Figures are order-of-magnitude for a single 1,000 t/y line.
Manual
12–18 people per shift, equipment around RMB 3–5 million excluding civil works and environmental systems; iodine scatter ±60–100 mg/g.
Semi-automatic
7–10 people per shift, roughly RMB 1.5–2.5 million more: gravimetric feeding, interlocked discharge cooling, automatic weighing with dust extraction. Scatter ±40–60 mg/g. Most plants at 500–2,000 t/y should stop here.
Fully automatic
3–5 people per shift, inspecting rather than operating; RMB 4–7 million extra for PLC/DCS interlocks, closed-loop temperature and steam, online oxygen analysis and automatic bagging. Scatter ±20–30 mg/g.
By capacity: manual under 500 t/y, semi-automatic to 2,000, automated with patrols to 5,000, full interlocking above that.
3. Where Automation Pays Best
Feeding
Hand feeding swings the rate by up to ±15% over a shift, and that swing lands on bed depth and residence time. Bucket elevator, belt and gravimetric feeder at ±2% cost RMB 300,000–600,000, remove two people per shift and cut iodine scatter by a third. Payback 12–18 months.
Discharge cooling
Design calls for carbon below 80 °C before it meets air; manual lines dump at 120–150 °C and bag it hot. Condensation forms, moisture climbs from 3% to 8%, apparent iodine drops 30–50 mg/g. A rotary cooler with an interlock above 80 °C costs RMB 400,000–800,000, saves no labour, but restores the numbers.
Packaging and dust
Manual weighing errs ±2%, which is 1 kg on a 50 kg bag. Automatic weighers hold ±0.2%; with local extraction the package runs RMB 250,000–500,000 and saves one or two people.
Where people still win
Cracked lining, coking or a blocked pipe: an operator reads flame and sound faster than any sensor, so keep one on patrol. Above 2,000 t/y the lab still stays manual.
4. Retrofit in Phases
Work backwards from the product end. Phase one: bagging weight, dust extraction, discharge interlock — RMB 600,000–1.2 million, 3–5 days down, payback about a year. Phase two: gravimetric feeding and conveying, RMB 400,000–800,000, about 7 days. Phase three: closed-loop temperature, steam and oxygen with a control room, RMB 2–4 million, 10–15 days, only after the first two phases produce data.
Run the same feedstock before and after each phase; record mean iodine, standard deviation, yield and output per shift. Scatter from 40 to 20 means it worked.
FAQ
Q: Is semi-automatic worth it at 800 t/y? A: Yes, but only bagging weight and the discharge interlock — under RMB 1 million, visible within the year.
Q: Does full automation mean no people to manage? A: No. It removes operators and adds instrument upkeep. One person per shift must read trends and spot sensor drift, or a failed oxygen analyser can ruin a furnace load.
Q: What is the most common mistake? A: Equipment without interlocks: carbon dumps before it cools, feeding continues into a full bin. Write interlock conditions into the contract and test them at acceptance.
Keywords: activated carbon production line, automation retrofit, capacity configuration
